Guest lectures


In the Frame of the SFB761 the following presentations were held:

6/2018 F. Roters, M. Diehl, S.L. Wong, P. Shanthraj, D. Raabe
DAMASK: the Düsseldorf Advanced MAterial Simulation Kit for studying multi-physics crystal plasticity phenomena (Vortrag), 10 Years ICAMS - International Symposium, 26. June 2018, Bochum

2/2018 F. Roters, L. Sharma, M. Diehl, P. Shanthraj
Including Damage Modelling into Crystal Plasticity Simulations using the Düsseldorf Advanced Material Simulation Kit DAMASK (eingeladener Vortrag), Symposium Nano and Micro Scale Damage in Metals, 8. February 2018, Utrecht, The Netherlands

11/2017 M. Herbig, Atomare Einsichten in Struktur und Zusammensetzung von Stählen durch korrelative Elektronenmikroskopie / Atomsondentomographie, 25. Werkstoffkolloquium des Technischen Beirats, 24. November, 2017,Hannover

11/2017 M.Herbig, C.D.Parra, W. Lu, Y. Toji, C. Liebscher, Y. Li, S. Goto, G. Dehm, D. Raabe, Where does the carbon atom go in steel? – Insights gained by correlative transmission electron microscopy and atom probe tomography, International Symposium on Steel Science 2017, 13-16. Nov, Kyoto, Japan

11/2017 M.Herbig, Materials Science Using Correlative Microscopy, JFE steel corporation, 2017, 10. Nov, Chiba, Japan

11/ 2017 M. Herbig, Materials Science Using Correlative Microscopy, Nippon Steel & Sumitomo Metals Corporation, 9.11.17, Kimitsu, Japan

11.2017 M. Herbig, Materials Science Using Correlative Microscopy, National Instiute for Materials Science (NIMS), 8.11.17, Tsukuba, Japan

9/2017 C. Haase, F. Kies, P. Köhnen K. G. Pradeep, A. Schwedt, M. B. Wilms, A. Weisheit, S. Ziegler, J. H. Schleifenbaum, W. Bleck: Alternative Processing of Advanced High-Strength Steels by Additive Manufacturing, Euromat, 17.-22.09., Thessaloniki, Greece 2017.

9/2017 F. Roters, S. L. Wong, P. Shanthraj, M. Diehl, D. Raabe: Thermo mechanically coupled simulation of high manganese TRIP/TWIP steel; 27th International Workshop on Computational Materials Modeling, IWCMM 27, September 21, Leuven, Belgium

9/2017 C. Haase, F. Kies, P. Köhnen K. G. Pradeep, A. Schwedt, M. B. Wilms, A. Weisheit, S. Ziegler, J. H. Schleifenbaum, W. Bleck: Mikrostruktur-Eigenschaftskorrelationen
additiv gefertigter Hochmanganstähle,
Werkstoffwoche, 26.-29.09., Dresden, Germany 2017.

9/2017 W. Bleck: Von der Mikrostruktur zur Nanostruktur - Werskstoff- und Prozessdesign für neue Stähle, Werkstoffwoche, Dresden (27.-29.09.2017)

9/2017 F. Roters: Klausurtagung des Erlanger Lehrstuhls für Werkstoffissenschaften WW1, Sattelbogen, 27.9.-29.9.17, Spatially correlated electron microscopy and atom probe tomography

6/2017 F. Roters, S. L. Wong, P. Shanthraj, M. Diehl, D. Raabe: Thermo mechanically coupled simulation of high manganese TRIP/TWIP steel; 5th International Conference on Material Modeling, ICMM 5, June 15, Rome, Italy

4/2017C. Haase: Tailoring the microstructure of HMnS: Mechanism-oriented material and process design, Institut für Werkstofftechnik, University Kassel, 2017, 24.04. in Kassel, Germany 2017.

3/2017 D. Bogdanovski, Methodenvortrag "ab initio - Was? Wie? Wozu?", gemeinsames Kolloquium mit SFB 799

3/2017 F. Roters, M. Bambach, S. L. Wong: Development of dislocation density based constitutive models - the parameter Dilemma; GAMM 2017, 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 07.03.2017, Weimar, Germany

1/2017 P. Shanthraj, M. Diehl, F. Roters: Coupling Phase-Field and Crystal-Plasticity Simulations; Plasticity 2017, 23rd International Conference on Plasticity, Damage & Fracture 2017, 07.01.2017, Puerto Vallarta, Mexico

12/2016 C. Haase: Tailoring the microstructure of high-manganese steels: Mechanism-oriented material and process design, Institute of Nanotechnology, KIT, 2016, 09.12. in Karlsruhe, Germany 2016.

9/2016 C. Haase, L. A. Barrales-Mora, D. A. Molodov and W. Bleck: Mechanismenorientiertes Werkstoff- und Prozessdesign von HMnS, DGM-Regionalforum Rhein-Ruhr 2016, 02.09. in Bonn, Germany 2016.

2/2016 C. Haase, L. A. Barrales-Mora, D. A. Molodov and G. Gottstein: Microstructure and Texture Evolution in TWIP Steels, Scientific Days LABEX DAMAS 2016, 22.02. in Metz, France 2016.

06/2014 W. Bleck: Werkstoff und Prozesstechnik für neue Stähle am Beispiel des SFB 761, erweiterter Vorstand, Stahlinstitut VDEh, Düsseldorf, Germany

05/2014 W. Bleck: Von der Mikrostruktur zur Nanostruktur - Werkstoff- und Prozesstechnik für neue Stähle. Ringvorlesung im Simulationswissenschaftlichen Zentrum, TU Clausthal, Germany LINK:

11/2012 W. Bleck: SFB 761 - Stahl ab initio - neue Methoden des Werkstoffdesigns, invited talk beim Institutsseminar des Instituts für Werkstoffwissenschaften der Friedrich-Alexander Universität Erlangen-Nürnberg, Germany

05/2012  W. Bleck: Neue Methoden zum Design hochfester kalt umformbarer Stähle. Leibniz-Institut für Festkörper- und Werkstoffforschung, Dresden, Germany




Im Rahmen des SFB 761 wurden folgende Gastvorträge gehalten:

9/2017: A. Togo, Klausurtagung SFB 761 in Hildesheim 2017: Software development and database for crystals (mainly Phonons); Kyoto University

7/2016: M. Huang: Deformation mechanisms of TWIP steel: from micro-pillars to bulk samples; University of Hong Kong

7/2016: P. E.J. Rivera-Diaz-Del-Castillo: Relationship between early processing and properties in bearing Steels: the effects of inclusions, area readuction and micro Segregation; University of Cambridge

10/2012: A.H. Romero Castro: Designing Materials from Scratch: Probing Theoretical Methods; Centro de Investigación y de Estudios Avanzados del Instituto Politècnico Nacional (Cenvestav) Unidad Querétaro, Mexico

09/2012: S. Brinckmann: Sequential and Concurrent Multiscale Simulations of Metal Fracture; Ruhr-Universität Bochum, Germany

09/2012: S. Lozano-Perez: High-Resolution Characterisation of Stress Corrosion Cracking in Stainless Steels; Oxford University, UK

09/2012: D. J. Jarvis: New Materials & Energy Research, ESA: Metallurgy Europe

08/2012: B.-J. Lee: Multi-Scale, Semi-Empirical Atomistic Approaches for Structural Materials Research; POSTECH, Pohang University of Science and Technology, South Korea

08/2012: M. Morales-Silva: Quantum Monte Carlo Methods; Lawrence Livermore National Lab, CA, USA

08/2012: K. Nakano: Analysis of the Initiation of Plastic Deformation in Fe-C Alloys; National Institute for Materials Science (NIMS), Tsukuba, Japan

07/2012: M. Asta: Dynamics of Grain-Boundary Motion Studied by in-situ Elektron Microscopy and Molecular Dynamics Simulations; University of California and Lawrence Berkeley National Laboratory, Berkeley, USA

07/2012: S. Korte: Plasticity in Hard Materials - Probing Deformation Mechanisms by Micromechanical Testing across Sizes and Temperatures; Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany

07/2012: A. Barnoush: Micro- and Nanomechanical Tesitng under Simulated Environmental Conditions; Saarland University, Saarbrücken, Germany

07/2012: G. Winther: Microstructure, Slip Systems and Plastic Anisotropy; Technical University of Denmark, Lyngby, Denmark

06/2012: A. Dianat: First-Principle Simulations of Materials Properties; TU Dresden, Germany

05/2012: A. Haschibon: Modeling and Simulation of Solid-Solid and Solid-Liquid Interfaces; Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany

05/2012: S. Bargmann: Modeling and Simulation of Polycrystalline Metals Based on Extended Crystal Plasticity; University of Dortmund, Germany

04/2012: R. Groeger: Atomic-Level Foundations of the Plastic Deformation of bcc Metals; Academy of Sciences of the Czech Republic, Institute of Physics of Materials, Brno, Czech Republic

04/2012: H. Kitaguchi: Understanding the Effect of Carbon and Carbides on Mechnical Properties and Developing a Strategy to Achieve Full Carbon Quantification using EELS and APT; Oxford University, UK

04/2012: O. Cheiliakh: The Creation and Strengthening of New Effective Functional Metastable Alloys Based on Effect of Phase Transformations Induced by Deformation; Pryazovskyi State Technical University, Mariupol, Ukraine

03/2012: T. Ohmura: Indentation-Induced Plasticity of Metals with Various Lattice Defects; National Institute for Materials Science (NIMS), Tsukuba, Japan

03/2012: I. Watanabe: Numerical Prediction of Deformed Microstructure Subjected to Plastic Forming with Two-Scale Finite Element Analysis; National Institute for Materials Science (NIMS), Tsukuba, Japan

03/2012: K. Verbeken: Evaluation of Hydrogen Trapping in Iron-Based Alloys by Thermal Desorption Spectroscopy; Ghent University, Belgium

02/2012: E. Spiecker: Bridging Length Scales in Transmission Electron Microscopy of Materials; Center for Nanoanalysis and Electron Microscopy (CENEM), Friedrich-Alexander-Universität Erlangen-Nürnberg

01/2012: S. Ringer: Alloy Design guided by Advanced Atom Probe Tomography and Microstructure Characterisation; Australian Centre for Microscopy & Microanalysis, University of Sydney, Australia 

12/2011: R. Sigel: Adsorption and Diffusion Dynamics at Interfaces; University Fribourg, Switzerland

12/2011: M. Militzer: Multi-scale Modelling of Phase Transformations in Steels; University of British Columbia, Vancouver, Canada

11/2011: J. Takahashi: Application of Atom Probe Tomography Analysis to Traditional Issues of Steel Materials; Advanced Technology Research Labs, Nippon Steel Corporation, Chiba, Japan

11/2011: G. Smith: Where are the Carbon Atoms in Martensite (2 Parts); University of Oxford, UK

10/2011: S. Naghavi: Elastic Properties of Heulser Compounds from First-Principle Calculations; Johannes Gutenberg Universität, Mainz, Germany

10/2011: K. Tsuzaki: Structural Materials Research at NIMS; National Institute for Materials Science (NIMS), Tsukuba, Japan

09/2011: J. B. Seol: Role of Carbon Atoms on the Deformation Behaviour of Strain-Induced Martensites in the High Mn Steels; POSTECH, Pohang University of Science and Technology, South Korea

09/2011: J. B. Seol: Atomic Scale Investigation on (Fe, Mn)3AlC Carbides Formed in High Aluminum Transformation-Induced-Plasticity Steels by Atom Probe Tomography; POSTECH, Pohang University of Science and Technology, South Korea

07/2011: A. Winkelmann: The Physics of EBSD; Max Planck Insittut for Microstructure Physics, Halle, Germany

07/2011: E. Kabliman: Ab initio-Based Mean Field Theory o the Site Occupation in the Fe-Cr Sigma Phase; Vienna University of Technology, Austria

05/2011: I. A. Abrikosov: Towards Predictive Theory for ab initio Simulations of Materials Properties; Linköping University, Sweden

05/2011: C. Scheu: Atomic Scale Analysis of Nanostructures and Interfaces; Ludwig-Maximilians Universität München, Germany

04/2011: G. Dehm: New Insights in Plasticity of Metals by Highly Localized in situ Measurements; Montanuniversität Leoben, Austria

10/2009: Solid-State Materials Chemistry between Theory, Synthesis, and Characterization; Asian Summer School, Sapporo University, Japan

07/2009: Theory of Intermetallic Materials; Cornell University, NY, USA

09/2008: Metal-rich Solids and Steel ab initio; Idaho National Laboratory, ID, USA

09/2007: Novel Solids by Theoretical and Synthetic Approaches; Tohoku University, Sendai, Japan

04/2007: Novel Solids by Theoretical and Synthetic Approaches; Oak Ridge National Laboratory, TN, USA